InicioTodos los productosAccessories

Tavolo con vari accessori Pedestal poggiati sopra

Accessories

Perimeter spacer 20/15/10

Perimeter spacer 20/15/10

The new PP perimeter spacer is a classy detail that allows you to elegantly and uniformly distance the slabs that make up the flooring from the perimeter walls, offering the maximum guarantee of stability. The new version allows, with the simple pressure o...

Cantilevered perimeter spacer

Cantilevered perimeter spacer

Cantilevered perimeter spacer The cantilevered spacer is a galvanised steel profile, 86.6 cm long, to be applied to the head of the supports close to the wall to solve the problem of small cantilevered slabs, which would otherwise be suspended without supp...

Llave ajustable para el soporte ajustable para pavimento elevado

Llave ajustable para el soporte ajustable para pavimento elevado

Llave ajustable para el soporte ajustable para pavimento elevado La llave ajustable reforzada para soporte ajustable para pavimento elevado permite un ajuste de precisión incluso del pavimento previamente instalado. Con muchos puntos de fuerza par...

Screwdriver accessory

Screwdriver accessory

Screwdriver accessory New steel screwdriver accessory for “quick unscrewing and screwing”.

Clip superior de borde vertical para suelo sobreelevado

Clip superior de borde vertical para suelo sobreelevado

Clip superior de borde vertical para suelo sobreelevado Hemos diseñado el clip de borde vertical para suelo sobreelevado con el objetivo de solucionar un problema común en muchos tipos de suelo externo, concretamente la colocación del borde cuando ...

Clip superior de borde vertical para suelo sobreelevado

Clip superior de borde vertical para suelo sobreelevado

Clip superior de borde vertical para suelo sobreelevado Hemos diseñado el clip de borde vertical para suelo sobreelevado con el objetivo de solucionar un problema común en muchos tipos de suelo externo, concretamente la colocación del borde cuando ...

Vertical angular lining clip

Vertical angular lining clip

Vertical angular lining clip This particular CLIP, both of the Head and of the Base, is used in the case of a vertical “corner” infill, instead of using two Head clips and two Base clips, a single Head clip and a single Base clip are used. ...

Clip universal para espesor de piso elevado

Clip universal para espesor de piso elevado

Clip de borbo placa para suelos sobreeelevados La placa de borbo clip para piso levantado fue diseñada por Eterno Ivica para evitar el contacto entre las placas y pisos levantados al aire libre, muro perimetral en la placa de tablero de clip, const...

Polypropylene perimeter spacer

Polypropylene perimeter spacer

New perimeter spacer The spacer is a classy detail that allows to space the flooring plates from the perimeter walls in an elegant and uniform way, offering the maximum guarantee of stability. The new spacer is produced entirely in...

SCUDO - SEPARATING LAYER

SCUDO - SEPARATING LAYER

Scudo - Separating layer Scudo is a 3 mm thick high density modified closed cell expanded insulating layer. Applied under the base of the support, it has the function of a separating layer, it protects the waterproof covering from flooring sup...

SUPPLEMENTARY RUBBER BASE

SUPPLEMENTARY RUBBER BASE

Supplementary Rubber Base The supplementary rubber base in thermoplastic rubber (TPE) is applied under the base of the pedestals and its function is to protect the waterproofing membrane from the supports of the raised flooring. It also decreases t...

SUPPLEMENTARY GALVANISED STEEL BASE

SUPPLEMENTARY GALVANISED STEEL BASE

Supplementary galvanised steel base The supplementary galvanised steel base consists of a 1 mm thick galvanised sheet and it measures 184x184 mm in size, it is applied under the base of the metal pedestals SMA and SMAT in order to protect the water...

SLAB LIFTER

SLAB LIFTER

Slab lifter It is an essential tool if you want to remove or move an already laid flooring slab. It has the possibility of slipping into the 2-3-4 mm joints, it is easy to hold and use. It is sufficient to insert the tool into the joint and rotate...

Zinc-plated lifting handle for tiles 400 x 400 mm

Zinc-plated lifting handle for tiles 400 x 400 mm

Zinc-plated lifting handle for tiles 400 x 400 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks...

Zinc-plated lifting handle for tiles 500 x 500 mm

Zinc-plated lifting handle for tiles 500 x 500 mm

Zinc-plated lifting handle for tiles 500 x 500 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simple one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks ...

Zinc-plated litfing handle for tiles 600 x 600 mm

Zinc-plated litfing handle for tiles 600 x 600 mm

Zinc-plated litfing handle for tiles 600 x 600 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks...

ADJUSTABLE LIFTING HANDLE

ADJUSTABLE LIFTING HANDLE

Adjustable lifting handle The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are insert...

SUCTION CUP SLAB LIFTER

SUCTION CUP SLAB LIFTER

Suction cup slab lifter The vacuum suction cup slab lifter is an innovative solution for handling ceramic slabs; thanks to the rubber plate, with a diameter of 200 mm, it guarantees excellent grip. Thanks to its side seal, it is pe...

Compensador de pendiente TWIST TW 110

Compensador de pendiente TWIST TW 110

Compensador de pendiente TWIST El compensador de pendiente Twist ha sido estudiado para permitir el nivelado de pendientes de 0 % a 1 % de inclinación con un simple movimiento. Modular y fácil de ajustar con una simple rotación, este compensa...

Compensador de inclinación TW 150

Compensador de inclinación TW 150

Compensador de inclinación El Compensador de inclinación TW 150, creado con un espesor específico de 150 para el soporte Star.T, permite una inclinación de 0 % hasta 1 %: su armonización y ajuste adecuado aseguran el aplanamiento perfecto de cualquie...

Safety plate

Safety plate

Safety plate The safety plate by Eterno Ivica consists of a 2 mm thick galvanized steel sheet, suitably shaped in order to support the flooring elements in the event of accidental breakage, eliminating the risk of accidents as the safety plate will support...

Slab edge profile

Slab edge profile The Slab edge profile by Eterno Ivica is designed to limit the raised floor’s edges in correspondence with a vertifcal covering. The slab edge profile has a 20mm decorative part and a tooth overlapped to the vertical plate in order to hi...

Calce para soporte LGH2mm

Calce para soporte LGH2mm

Calce para soporte LGH2 Calce para soporte LGH2 antideslizante y reductor del ruido. Discos para calzar una o más partes del soporte.

Calce para soporte LGH3

Calce para soporte LGH3

Calce para soporte LGH3 Calce para soporte LGH3 antideslizante y reductor del ruido. Discos para calzar una o más partes del soporte.

Calzador de goma LH3 parasoporte

Calzador de goma LH3 parasoporte

Calzador de goma LH3 para soporte Discos para calzar una o más secciones del soporte. El calzador LH3 para los soportes se puede usar por encima o por debajo de cualquier soporte y actúa como un calzador para una o más secciones del soporte.

Livellatore gomma LGH1mm

Livellatore gomma LGH1mm

Spessore Livellatore LGH1 per Supporto Spessore Livellatore LGH1 per Supporto con effetto antiscivolo e antirumore. Dischi per spessorare uno o più settori del supporto.

Clips for hexagonal plates

Clips for hexagonal plates

Clip for laying hexagonal plates With the simple and quick application of a small polypropylene clip on the heads of SE and NM supports, we can meet the creative needs of architects and customers who see in the hexagonal plates a possible and imaginat...

TOOL TO INCREASE THE THICKNESS OF THE FINS

TOOL TO INCREASE THE THICKNESS OF THE FINS

Tool to increase the thickness of the fins This accessory allows to increase the thickness of the fins, it is simply pushed into the 4 mm thick fins and it is available for sizes from 5-6-7-8-9-10 mm. The 12 mm height of the fins rem...

Tile levelling system

Tile levelling system

Leveller for tiles The leveller for tiles is an indispensable tool for the installation of porcelain stoneware floors and walls and it consists of three elements: a tie rod, a spacer and a protection ring. The cylindrical part called "tie rod" is ...

Profilo perimetrale verticale

Profilo perimetrale verticale

Profilo perimetrale verticale Il Profilo Perimetrale Verticale è un elemento di chiusura e finitura dei bordi perimetrali nelle pavimentazioni sopraelevate esterne, si adatta perfettamente alle lastre di pavimentazione dello spessore di 20 mm e a tutti i&n...

Giunto Angolo 90°

Giunto Angolo 90°

Giunto Angolo 90° Il Giunto Angolo 90° è un accessorio correlato del profilo perimetrale verticale. Disponibile in due colori, silver e grigio antracite, il giunto è in alluminio e ha altezze standard di 30-60-90-120-150-180 mm. Necessario per...

Giunto Lineare

Giunto Lineare

Giunto Lineare Il Giunto Lineare è un accessorio correlato del profilo perimetrale verticale. É disponibile in due colori, silver e grigio antracite, il giunto è in alluminio e ha altezze standard di 30-60-90-120-150-180 mm, come il profilo e come il...

Perimeter spacer profile

Perimeter spacer profile The perimeter spacer profile, made of aluminum, is a finish that allows the creation of practical, aesthetic, and effective perimeter edges of a raised floor next to a wall.The profile creates a gap of 1 or 2 cm between the floorin...

Últimas noticias