HomeAll productsAccessories

Tavolo con vari accessori Pedestal poggiati sopra

Accessories

Perimeter spacer 20/15/10

Perimeter spacer 20/15/10

The new PP perimeter spacer is a classy detail that allows you to elegantly and uniformly distance the slabs that make up the flooring from the perimeter walls, offering the maximum guarantee of stability. The new version allows, with the simple pressure o...

Cantilevered perimeter spacer

Cantilevered perimeter spacer

Cantilevered perimeter spacer The cantilevered spacer is a galvanised steel profile, 86.6 cm long, to be applied to the head of the supports close to the wall to solve the problem of small cantilevered slabs, which would otherwise be suspended without supp...

Adjusting key

Adjusting key

Adjusting key Adjusting key for adjustable supports for elevated floors, reinforced for millimeter adjustment even with the floor already laid. Many strengths, for a 30% faster installation, safe and without problems. With the new raw cut in...

Screwdriver accessory

Screwdriver accessory

Screwdriver accessory New steel screwdriver accessory for “quick unscrewing and screwing”.

Upper clip for vertical closure

Upper clip for vertical closure

Upper clip for vertical closure We designed the vertical clip edge for raised flooring to address a common problem for many types of external flooring: namely, plugging the edge in the absence of an outside wall. The vertical clip edge is an innov...

Lower clip for vertical closure

Lower clip for vertical closure

Lower clip for vertical closure We designed the vertical clip edge for raised flooring to address a common problem for many types of external flooring: namely, closing the edge in the absence of an outside wall. The vertical clip edge is an innova...

Vertical angular lining clip

Vertical angular lining clip

Vertical angular lining clip This particular CLIP, both of the Head and of the Base, is used in the case of a vertical “corner” infill, instead of using two Head clips and two Base clips, a single Head clip and a single Base clip are used. ...

Perimeter spacer

Perimeter spacer

Perimeter spacer The perimeter spacer for raised floor is designed by Eterno Ivica to avoid contact between plates and outdoor raised floors, perimeter wall. It is entirely built in stainless steel, is equipped with a shock absorber for the lo...

Polypropylene perimeter spacer

Polypropylene perimeter spacer

New perimeter spacer The spacer is a classy detail that allows to space the flooring plates from the perimeter walls in an elegant and uniform way, offering the maximum guarantee of stability. The new spacer is produced entirely in...

SCUDO - SEPARATING LAYER

SCUDO - SEPARATING LAYER

Scudo - Separating layer Scudo is a 3 mm thick high density modified closed cell expanded insulating layer. Applied under the base of the support, it has the function of a separating layer, it protects the waterproof covering from flooring sup...

SUPPLEMENTARY RUBBER BASE

SUPPLEMENTARY RUBBER BASE

Supplementary Rubber Base The supplementary rubber base in thermoplastic rubber (TPE) is applied under the base of the pedestals and its function is to protect the waterproofing membrane from the supports of the raised flooring. It also decreases t...

SUPPLEMENTARY GALVANISED STEEL BASE

SUPPLEMENTARY GALVANISED STEEL BASE

Supplementary galvanised steel base The supplementary galvanised steel base consists of a 1 mm thick galvanised sheet and it measures 184x184 mm in size, it is applied under the base of the metal pedestals SMA and SMAT in order to protect the water...

SLAB LIFTER

SLAB LIFTER

Slab lifter It is an essential tool if you want to remove or move an already laid flooring slab. It has the possibility of slipping into the 2-3-4 mm joints, it is easy to hold and use. It is sufficient to insert the tool into the joint and rotate...

Zinc-plated lifting handle for tiles 400 x 400 mm

Zinc-plated lifting handle for tiles 400 x 400 mm

Zinc-plated lifting handle for tiles 400 x 400 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks...

Zinc-plated lifting handle for tiles 500 x 500 mm

Zinc-plated lifting handle for tiles 500 x 500 mm

Zinc-plated lifting handle for tiles 500 x 500 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simple one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks ...

Zinc-plated litfing handle for tiles 600 x 600 mm

Zinc-plated litfing handle for tiles 600 x 600 mm

Zinc-plated litfing handle for tiles 600 x 600 mm The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks...

ADJUSTABLE LIFTING HANDLE

ADJUSTABLE LIFTING HANDLE

Adjustable lifting handle The plate-laying handle is available in two versions: one is adjustable from 380 to 620 mm, and another simpler one for standard sizes from 400, 500 or 600 mm. The handle is provided with two lateral hooks that are insert...

SUCTION CUP SLAB LIFTER

SUCTION CUP SLAB LIFTER

Suction cup slab lifter The vacuum suction cup slab lifter is an innovative solution for handling ceramic slabs; thanks to the rubber plate, with a diameter of 200 mm, it guarantees excellent grip. Thanks to its side seal, it is pe...

TWIST slope compensator TW 110

TWIST slope compensator TW 110

TWIST Slope Compensator The Twist slope compensator has been studied to allow the leveling of slopes from 0% up to 1% degree with a simple movement. Modular and easy to adjust with a simple rotation, allows for perfectly flat surfaces. Twist ...

Slope Compensator TWIST 150

Slope Compensator TWIST 150

Slope Compensator TWIST 150 The Twist slope compensator TW 150, created in the specific 150 thickness for the Star.T support, allows the inclination from 0% up to 1%: suitably matched and adjusted ensure the perfect fl atness of any pavement. Compatible wi...

Safety plate

Safety plate

Safety plate The safety plate by Eterno Ivica consists of a 2 mm thick galvanized steel sheet, suitably shaped in order to support the flooring elements in the event of accidental breakage, eliminating the risk of accidents as the safety plate will support...

Slab edge profile

Slab edge profile The Slab edge profile by Eterno Ivica is designed to limit the raised floor’s edges in correspondence with a vertifcal covering. The slab edge profile has a 20mm decorative part and a tooth overlapped to the vertical plate in order to hi...

LGH2 shim for support

LGH2 shim for support

LGH2 shim for support LGH2 shims' thickness for supports with anti-slip and anti-noise effect. Disks for creating thickness in one or more support's sections.

LGH3 Shim for support

LGH3 Shim for support

LGH3 Shim for support LGH3 shim for support with anti-slip and noise reduction. Disks for shimming one or more sections of the support.

LH3 rubber shim for support

LH3 rubber shim for support

LH3 rubber shim for support Disks for shimming one or more sections of the support. The LH3 shim for supports can be used above or below any support and acts as a shim for one or more sections of the support.

LGH1 shims' thickness for supports

LGH1 shims' thickness for supports

LGH1 shims' thickness for supports LGH1 shims' thickness for supports with anti-slip and anti-noise effect. Disks for creating thickness in one or more support's sections.

Clips for hexagonal plates

Clips for hexagonal plates

Clip for laying hexagonal plates With the simple and quick application of a small polypropylene clip on the heads of SE and NM supports, we can meet the creative needs of architects and customers who see in the hexagonal plates a possible and imaginat...

TOOL TO INCREASE THE THICKNESS OF THE FINS

TOOL TO INCREASE THE THICKNESS OF THE FINS

Tool to increase the thickness of the fins This accessory allows to increase the thickness of the fins, it is simply pushed into the 4 mm thick fins and it is available for sizes from 5-6-7-8-9-10 mm. The 12 mm height of the fins rem...

Tile levelling system

Tile levelling system

Leveller for tiles The leveller for tiles is an indispensable tool for the installation of porcelain stoneware floors and walls and it consists of three elements: a tie rod, a spacer and a protection ring. The cylindrical part called "tie rod" is ...

Vertical perimeter profile

Vertical perimeter profile The Vertical perimeter profile is an element of closure and finishing of the perimeter edges in the external raised flooring, it adapts perfectly to the flooring slabs of 20 mm thickness and to the supports that act as ...

Joint 90° Angle

Joint 90° Angle

Joint 90° Angle The 90° Corner Joint is a related accessory of the vertical perimeter profile. Available in two colors, silver and anthracite gray, the joint is in aluminum and has standard heights of 30-60-90-120-150-180 mm. Necess...

Linear joint

Linear joint

Linear joint The Linear Joint is a related accessory of the vertical perimeter profile. It is available in two colors, silver and anthracite gray, the joint is in aluminum and has standard heights of 30-60-90-120-150-180 mm, like the profile and the 90 ° ...

Perimeter spacer profile

Perimeter spacer profile The perimeter spacer profile, made of aluminum, is a finish that allows the creation of practical, aesthetic, and effective perimeter edges of a raised floor next to a wall.The profile creates a gap of 1 or 2 cm between the floorin...

Latest News

The restoration of a complex in Singen on Lake Constance in Germany

14/10/2024

The restoration of a complex in Singen on Lake Constance in Germany

Eterno Ivica Academy - technical support and training

Cersaie 2024: a year dedicated to innovation and collaboration

26/09/2024

Cersaie 2024: a year dedicated to innovation and collaboration

This important event is over, we tell you all about what we were involved in

Terra-Fix: the accessory that anchors supports to the ground

21/08/2024

Terra-Fix: the accessory that anchors supports to the ground

Your raised floor laid directly on grass or soil

Eterno Ivica achieves EPD Certification

04/09/2024

Eterno Ivica achieves EPD Certification

A great achievement in sustainability for Eterno Ivica

Eterno Ivica's new B2B platform is online!

23/07/2024

Eterno Ivica's new B2B platform is online!

The new B2B service designed to optimize your purchases. Starting from today, shopping in Eterno Ivica has no limits!

New perimeter spacer 20/15/10 available now

09/07/2024

New perimeter spacer 20/15/10 available now

The accessory that allows slabs to be spaced from the wall at different sizes

Architexture 2024 - Bologna

14/06/2024

Architexture 2024 - Bologna

The annual film event dedicated to the world of architecture is back!

Today the general catalog is available in Slovenian and Croatian

22/04/2024

Today the general catalog is available in Slovenian and Croatian

Eterno Ivica always by the side of its customers

The New NEW MAXI support - NM0

21/05/2024

The New NEW MAXI support - NM0

The size that was missing has arrived: NM0, the 15 - to 25-mm height-adjustable stand that completes the New Maxi range.

Siloah Krankenhaus - Pforzheim

15/03/2024

Siloah Krankenhaus - Pforzheim

The GRF SYSTEM completes the important realization in Germany

Eterno Ivica Academy is Ready to Go

25/01/2024

Eterno Ivica Academy is Ready to Go

Discover the upcoming events